Showing all 5 results

Bench Spray Booths

Request A Quote

Bench Spray Booths

SAFE, CODE-COMPLIANT PAINT BOOTHS

Our smallest paint booths, Bench Booths allow businesses and hobbyists to paint small products in a safe, code-compliant environment. Models are available with an integrated raised bench or designed to be placed on a countertop to make painting small parts easy and accessible.

GFS Bench Paint Booths are constructed from high-quality, 18-gauge, G90 galvanized sheet steel. Quality components — including precision-punched panels with sturdy nut-and-bolt assembly — confirm longevity, safety and excellent structural integrity.

In GFS Bench Paint Booths, air is filtered through an exhaust chamber with high-efficiency filtration. All Bench Booths come complete with a full set of 20 by 20-inch GFS Wave exhaust filters. Installing and replacing filters is easy with the grid system; you can avoid waste and save cost by replacing only the filter squares that need changing. An included manometer indicates when filters need to be replaced.

High-powered fans and motors create adequate airflow through the paint booth, creating a cleaner environment for a better paint job.  Each Bench Booth includers a non-sparking tube axial exhaust fan with belt guards and duct connector ring, and a three-phase, TEFC, tri-voltage motor with variable pitch pulley.

Our largest Bench Paint Booth models feature a four-tube, inside-access fluorescent light fixture in the booth ceiling for a brighter painting environment and easy tube replacement. GFS light fixtures are Class 1, Division 2 ETL/ETL-C listed and come complete with T8 color-corrected tubes.

GFS Bench Spray Booths are designed to meet all applicable International Fire Code and NFPA codes for proper airflow and paint booth use. Our complete engineering staff includes structural, mechanical, electrical and code compliance experts to ensure that you can achieve all necessary permits and stamped drawings for your new paint booth.

Ideally suited for marine, bridge, rail and wind energy applications, the Graco XM is fully configurable for your specific coatings job.

  • New dosing technology assures accurate, on-ratio mixing for better yield and less waste
  • Advanced, intuitive user controls provide real-time display of ratio
  • USB port lets you easily access and download historical spraying data
  • Supports multiple spray guns for added productivity
  • Allows for easy crane transport with eye hooks on air motors
  • Variable ratio system – handles material ratios from 1:1 to 10:1

 


 

Downloads

Brochure Product List

Open Face Paint Booths

Request A Quote

Open Face Industrial Paint Booths

Our most popular industrial spray booths, Global Finishing Solutions® (GFS) Open Face Paint Booths are flexible, cost-effective solutions for a wide variety of finishing applications. The open-front design saves valuable floor space and makes it easy to move products and parts in and out of the booth. Choose from 260 pre-engineered models with fast shipping or we can custom design an Open Face Booth to meet your specific requirements.

GFS Open Face Paint Booths are constructed from high-quality, 18-gauge, G90 galvanized sheet steel. Quality components — including precision-punched panels with sturdy nut-and-bolt assembly — confirm longevity, safety and excellent structural integrity.

The most cost-effective airflow style, crossdraft airflow offers reliable performance at an affordable price point. Since there is no pit to dig, crossdraft spray booths are also easier to integrate into existing facilities. In Open Face Paint Booths, unfiltered air enters at the front of the booth. From there, air flows horizontally through the booth, flowing over the product and into a filter bank in the booth rear.

Open Face Paint Booths from Global Finishing Solutions feature integrated four-tube, inside-access fluorescent light fixtures for great visibility of your products and easy tube replacement. GFS light fixtures are Class I, Division 2 ETL/ETL-C listed and come complete with T8 color-corrected tubes.

In GFS Open Face Paint Booths, air is filtered through an exhaust chamber with high-efficiency filtration. All Bench Booths come complete with a full set of 20 by 20-inch GFS Wave exhaust filters. Installing and replacing filters is easy with the grid system; you can avoid waste and save cost by replacing only the filter squares that need changing. An included manometer indicates when filters need to be replaced.

GFS Bench Spray Booths are designed to meet all applicable International Fire Code and NFPA codes for proper airflow and paint booth use. Our complete engineering staff includes structural, mechanical, electrical and code compliance experts to ensure that you can achieve all necessary permits and stamped drawings for your new paint booth.


Downloads

Brochure Product List

Enclosed Finishing Paint Booths

Request A Quote

Enclosed Finishing Paint Booths

With high-efficiency filtered intake doors, GFS Enclosed Finishing Booths provide a safe, cost-effective finishing environment for producing quality paint finishes. Filtered doors prevent dirt and dust from entering the paint booth for cleaner paint jobs with less rework. Enclosed Finishing Booths are available in 260 pre-engineered models and standard options or can be customized to meet your needs.

GFS Enclosed Finishing Paint Booths are constructed from high-quality, 18-gauge, G90 galvanized sheet steel. Quality components — including precision-punched panels with sturdy nut-and-bolt assembly — confirm longevity, safety and excellent structural integrity.

The most cost-effective airflow style, crossdraft airflow offers reliable performance at an affordable price point.  Since there is no pit to dig, crossdraft booths are also easier to integrate into existing facilities.  In Enclosed Finishing booths, air enters through filtered doors.  From there, air flows horizontally through the booth, flowing over the product and into a filter bank in the booth rear.

Enclosed Finishing Paint Booths from Global Finishing Solutions feature integrated four-tube, inside-access fluorescent light fixtures for great visibility of your products and easy tube replacement. GFS light fixtures are Class I, Division 2 ETL/ETL-C listed and come complete with T8 color-corrected tubes.

In GFS Enclosed Finishing Paint Booths, air is filtered through an exhaust chamber with high-efficiency filtration. All Enclosed Finishing Booths come complete with a full set of 20 by 20-inch GFS Wave exhaust filters. Installing and replacing filters is easy with the grid system; you can avoid waste and save cost by replacing only the filter squares that need changing. An included manometer indicates when filters need to be replaced.

GFS Enclosed Finishing Paint Booths are designed to meet all applicable International Fire Code and NFPA codes for proper airflow and paint booth use. Our complete engineering staff includes structural, mechanical, electrical and code compliance experts to ensure that you can achieve all necessary permits and stamped drawings for your new paint booth.

 


 

Downloads

Brochure Product Sheet

 

 

 

 

 

 

General Purpose Paint Booths

Request A Quote

General Purpose Industrial Paint Booths

Global Finishing Solutions® (GFS) General Purpose Paint Booths are high-quality, cost-effective solutions for industrial manufacturers and businesses that need to paint equipment, utility vehicles and trucks that are too large for traditional automotive refinish booths but too small for our Large Equipment Paint Booth line.

General Purpose Paint Booths are constructed from high-quality, 18-gauge, G90 galvanized sheet steel. Quality components including plate steel door hinges, friction-style latches and precision-punched vertical panels with sturdy nut-and-bolt assembly ensure longevity, safety and structural integrity.

Pre-engineered General purpose models and options are fully ETL and ETL-C listed, ensuring that the entire booth complies with applicable safety codes and meets performance requirements.

Designed and manufactured by GFS for optimal brightness, General Purpose Booths feature strategically-placed hip light fixtures for precise, complete lighting with minimal shadows. Light fixtures are ETL and ETL-C listed and come complete with T8 ballasts and color-corrected tubes.

In General Purpose Paint Booths, air is filtered through an exhaust chamber with high-efficiency filtration. All General Purpose Booths come complete with a full set of 20 by 20-inch GFS Wave exhaust filters. Installing and replacing filters is easy with the grid system.  An included manometer indicates when filters need to be replaced.

Swing-type product doors (filtered or solid) and at least one personnel door come standard with each pre-engineered General Purpose Paint Booth. Doors feature heavy-duty hinges with plate steel and replaceable brass brushings. Hinges guarantee long-lasting performance with no sagging.

For non-pressurized booths, an electromechanical control panel is used to control booth exhaust, safety interlocks and lights.  The velocity control panel comes standard with pressurized booths and features an Allen-Bradley PLC and HMI, making it simple to navigate.  Velocity supports spray, flash, and cure modes along with many programmable alarms, an auto-balancing system and automatic safety checks.

GFS Enclosed Finishing Paint Booths are designed to meet all applicable International Fire Code and NFPA codes for proper airflow and paint booth use. Our complete engineering staff includes structural, mechanical, electrical and code compliance experts to ensure that you can achieve all necessary permits and stamped drawings for your new paint booth.


 

Downloads

Brochure Product List

Large Equipment / Truck Paint Booths

Request A Quote

Large Equipment / Truck Paint Booths

Global Finishing Solutions® (GFS) Large Equipment / Truck Paint Booths are designed for long-lasting performance and constructed of heavy-duty materials for unrivaled structural integrity. As the industry’s most comprehensive paint booth line, you can count on Large Equipment / Truck Paint Booths to deliver a superior quality finish in the most efficient manner.

Large Equipment/Truck Paint Booths are constructed from high-quality, 18-gauge, G90 galvanized sheet steel. Quality components including plate steel door hinges, friction-style latches and precision-punched vertical panels with sturdy nut-and-bolt assembly ensure longevity, safety and structural integrity.

Pre-engineered Large Equipment / Truck models and options are fully ETL and ETL-C listed, ensuring that the entire booth complies with applicable safety codes and meets performance requirements.

Designed and manufactured by GFS for optimal brightness, Large Equipment / Truck Paint Booths feature integrated four-tube, inside-access fluorescent light fixtures. Light fixtures are ETL and ETL-C listed, and come complete with T8 ballasts and color-corrected tubes.

In Large Equipment / Truck Paint Booths, air is filtered through an exhaust chamber with high-efficiency filtration. All Large Equipment / Truck Booths come complete with a full set of 20 by 20-inch GFS Wave exhaust filters.  An included manometer indicates when filters need to be replaced.

Swing-type product doors (filtered or solid) and at least one personnel door come standard with each pre-engineered Large Equipment / Truck Paint Booths. Doors feature heavy-duty hinges with plate steel and replaceable brass brushings. Hinges guarantee long-lasting performance with no sagging.

For non-pressurized booths, an electromechanical control panel is used to control booth exhaust, safety interlocks and lights.  The velocity control panel comes standard with pressurized booths and features an Allen-Bradley PLC and HMI, making it simple to navigate.  Velocity supports spray, flash, and cure modes along with many programmable alarms, an auto-balancing system and automatic safety checks.

GFS Large Equipment / Truck Paint Booths are designed to meet all applicable International Fire Code and NFPA codes for proper airflow and paint booth use. Our complete engineering staff includes structural, mechanical, electrical and code compliance experts to ensure that you can achieve all necessary permits and stamped drawings for your new paint booth.

 


 

Downloads

Brochure Product List